FYP 2

Week 16


INTRODUCTION 

 The final year project 2 is basically a continue progress from the previous final year project 1. The project of Renewable Energy Trainer was construct and build during the final year project 2. By designing the schematic diagram of  trainer shape and circuit base of three renewable energy kit. All the progress of hardware and circuit will be update week by week according to working plan.



in week 16, i had decided to make a list to purchase the component and equipment use.

component and material order list :

1) 

DC Digital Multifunction Power Meter Energy Monitor Module Voltmeter Ammeter 6.5V-100V

Feature:                                                                                                                                                                                              

  

20A DC multifunction power meter LCD display wih backlight, easy to read Bult-in shunt design, no extra needed Power, current, voltage and energy display and monitor timely , easy to know electric energy consumption Electric energy clear function, perfect for various device monitor separately overload alarm function (over power alarm threshold, the backlight and voltage flashing alarm) Power memory, shave the power parameter when power down, safe to use.

Description:                                                                                                                                                                                                   

Working Voltage		DC 6.5V-100V
Measuring Voltage		DC 6.5V-100V
Measuring Voltage		0-20A
Rated Power		2000W
Display		LCD
Display Format	Power	0.0-999.9W (<1KW)
		1000-2000w(>1KW)
	Energy	0-999Wh(<10KWh)
		10-9999KWh(>10KWh)
	Voltage	6.50-99.99V
	Current	0.00-20.00A

2)   Mini 3V-35V DC PWM Speed Controller

Feature:

PWM DC motor speed controller is a very safe product.
When the situation is overcurrent, it will disconnect by itself. after cooling off a few seconds, the fuse will recovery automatically.
With high voltage and high current resettable fuse
Mini but useful

Specification:

Operating voltage: DC3V-35V
Control power: 90W (maximum)
Quiescent current: 0.015A (standby)
PWM duty cycle: 1% -100%
PWM frequency: 10khz
Size: 29mm*23mm (excluding handles)
Total height: 15mm

3) LED Spotlight Bulb 12V DC

Description :

MR16 4W Warm White 360LM SMD 3528 LED Spotlight Bulb 12V DC

Connector : MR16

Type :  LED Light Bulbs

LED Quantity : 60

Wattage : 4W

Voltage : DC 12V

Light Color : Warm White(2700-3200k),White(6000-6500k) 

LED Source : SMD 3528

Lumens : 360Lm

Dimension(mm) : 50mm x 47mm (H*D)

Beam Angle : 120 Degree

Features :

1.Energy Saving

2.Long operating life

3.Innovation bulb chandelier, return to the ancients, apply to the bar, evening party, decorate

4.Suitable for hotel, dining-room,meeting room, drawing room,showroom, shop,corridor, telephone booth,studio and exhibition etc. as partial lighting.

5.Entertainment Lighting, Architectural Lighting, City Beautification, Partial Lighting, Decorative illumination at home and public areas

4) Micro Wind/HYDRO Turbines Rotating Blades Generator Small DC Motor

Specification:

Motor diameter : 24.5mm/0.96"
Motor height : 3mm/1.18"
Motor shaft diameter : 2mm/0.079"
Motor shaft length : 13.5mm/0.53"
Blade diameter : 100mm/3.94" (after assembling)
Blade aperture : 1.95mm/0.077"
Output voltage : DC 0.01V - 5.5V
Output current : 0.01 - 100mA
Rated speed : 100 - 6000 rev/min

5) 12V DC 4L/Min 100PSI High Pressure Diaphragm Water Pump

Easy to install.

Corrosion resistant.

Totally sealed, high stable pressure.

Rubber bracket can absorb vibration from the pump when working.

When the water pressure is too high, pump will protect themselves and normal work, water pipes will not burst, it is safe and durable.

Specifications : 

Volts : 12V DC

Amp Draw : 3.0AMP

Pressure : 100 PSI ( 5.5Bar )

Inlet/ Outlet : 0.5 inch/ 10mm hose barb

Flow : 4L/ min

Temperature : 0-60 degree Celsius

Size : 16 x 10 x 6.5 cm/ 6.30 x 3.94 x 2.56 inch

Weight : 592g

Length of Red Line : 57.5cm/ 22.64 inch

Length of Yellow Line : 49cm/ 19.29 inch

6)  12V DC 50mm Blow Radial Cooling Fan

Feature:

Excellent for cooling heatsinks on hot ends, prints, or other cooling needs
Made of high quality PBT+30% glass line +VO
Bearing is high precision, long life and low noise
Temperature of usage environment: -20℃ to 75℃
Working environment temperature: 40℃
Service life: Can be continuous working 24 hours
Speed: 4500, 6500 (R/min)
Voltage: DC 12V
Size: 50 x 50 x 15mm
Structure: Sleeve bearing